Activating Perfect Balance - Hunter Ceiling fan Owner's Manual And Installation Manual

7-1. If you are using one of the enclosed downrods, it is now time
for you to activate the Perfect Balance
five red retaining screws. Rotate the blades slowly until one of the
red retaining screws is visible through the notch in the mounting
plate. Remove the retaining screw from the bottom of the fan
housing using a screwdriver. Repeat this process for all 5 retaining
screws.
Note: After the retaining screws are removed, the blades will feel loose.
This is normal, as loose blades are a characteristic of the Perfect
Balance system.
TM
7-2. If you are using a downrod longer than 6 inches, leave the
retaining screws in their place and continue the installation
process.
7 • Activating Perfect Balance
system by removing the
TM
Switch Housing
Mounting Plate
Red Retaining
Screws
11
42790-01 • 20080925 • Hunter Fan Company
TM
Notch
Steps 7-1 – 7-2