Completing Your Installation With A Bowl Light Fixture - Hunter 20578 Quick Start Manual And Installation Manual

9 • Completing Your Installation With a Bowl Light Fixture
9.1
Partially install inner switch housing screws (69) into the switch housing
mounting plate.
9.3
Align the keyhole slots in the upper switch housing with the inner switch
housing screws (69). Turn the housing counterclockwise until the inner
switch housing screws (69) are firmly situated in the narrow end of the
keyhole slots. Install the remaining screw into the housing. Tighten all
three screws firmly.
69
30
69
42798-01 • 12/28/09 • Hunter Fan Company
9.2
Feed the upper plug connector through the center opening of the upper
switch housing (30).
Your Hunter fan comes with an integrated light fixture assembly and an optional
switch housing cap and plug button. This feature gives you the option of installing
the fan with OR without the included light fixture. If you want to install the
light fixture, proceed with Step 9.4 now. If you do not want to install the light
fixture, you need to remove it now. See Step 10.1, "Removing the Light Fixture."
Once you have removed the light fixture, continue with Step 9.4.
16 16
30