6.1
Swing the fan up to align the ceiling mounting plate cover screw holes with
the mounting holes on the ceiling mounting plate(2).
6.3
4
Using both hands, push the ceiling mounting plate cover trim ring (4) up
to the top of the ceiling mounting plate cover. The ceiling mounting plate
cover trim ring will snap and lock into place.
6 • Installing the Ceiling Plate Cover
2
3
3
42798-01 • 12/28/09 • Hunter Fan Company
62
6.2
Partially install (about 2 full turns) the three ceiling mounting plate cover
screws (62) into the ceiling mounting plate. Once all three screws are in,
tighten them.
6.4
4
Should you need to remove the trim ring, press firmly on opposite sides of
the trim ring (4). The tabs will flex out releasing the ceiling mounting plate
cover trim ring (4).
13
13
3
3