Ricoh Priport HQ9000 Network Manual page 44

Using the Printer Function
L
Assign print queues to the created printer as follows:
A On the [Print Server Configuration] menu, click [Queues Serviced By Printer].
B Select the printer created in step
C Press the {INSERT} key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on screen to make other necessary settings.
When you have finished the above procedure, make sure the queues are
assigned.
M
Press the {ESC} key until the "Exit?" appears, and then click [Yes] to quit
PCONSOLE.
N
Start the print server by entering the following from the NetWare server's
keyboard.
5
If it is running, restart after quitting.
❖ To quit
CAREE: unload pserver
❖ To start
CAREE: load pserverprint_server_name
Note
❒ If the printer works as configured, "Waiting for job" appears.
❒ NetWare 3.x ends here.
NetWare 4.x, 5/5.1, 6
A
Log on to the file server as an administrator, or equivalent.
B
Start SmartDeviceMonitor for Admin.
C
On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of machines appears.
D
In the list, select the printer for which you want to change configuration.
E
On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts.
F
Click [Property Sheet], and then click [OK].
The [NIB Setup Tool - Network board list] dialog box appears.
38
K
.