Parameter
rate {auto | 11m | 5.5m | 2m | 1m}
Note
❒ When changing the interface to IEEE 802.11b interface, see p.80 "TCP/IP ad-
dress".
❒ When configuring the IEEE 802.11b interface TCP/IP, see p.80 "TCP/IP ad-
dress".
Changing the host name
Use the "hostname" command to change the printer name.
msh hostname interface_name
Interface name
ether
*2
wlan
*1
If you did not enter the interface name, it will be automatically set to the Ethernet in-
terface.
*2
Available when the IEEE 802.11b interface unit is installed.
Note
❒ Enter the printer name using up to 15 characters.
❒ You cannot use a printer name starting with "RNP" or "rnp".
❒ The Ethernet interface and IEEE 802.11b interface will have the same printer
name.
Value to be configured
You can set the IEEE 802.11b transmission
speed.
The transmission speed you specify here is
the speed at which data is sent. You can re-
ceive data at any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
printer_name
Interface to be configured
*1
Ethernet interface
IEEE 802.11b interface
Remote Maintenance by telnet
9
93