Ricoh Priport HQ9000 Network Manual page 88

Appendix
-Address
❖ Subnet Mask
A number used to numerically "mask" or hide the IP address on the network
by eliminating those parts of the address that are alike for all machines on the
network.
❖ Broadcast address
A specified address for sending data to specific devices on the network.
Note
❒ To get the above addresses, contact your network administrator.
❒ If you do not know the address to configure, use the machine's default.
❒ The Ethernet interface and IEEE 802.11b interface share the same TCP/IP ad-
dress. When changing interfaces, the former interface setting is applied to the
new interface.
Access control
Use the "access" command to view and configure access control. You can also
specify two or more access ranges.
❖ Reference
msh> access
❖ Configuration
msh> access ✩ range start-address end-address
9
• ✩ represents a target number between 1 and 5. (Up to five access ranges
can be registered and selected.)
Example: To specify accessible IP addresses between 192.168.0.10 and
192.168.0.20:
msh> access 1 range 192.168.0.10 192.168.0.20
Note
❒ The access range restricts the workstations from which printing is possible
by means of an address. If you do not need to restrict printing, make the
setting "0.0.0.0".
❒ The entry is invalid if the start address is greater than the end address.
❒ Up to five access ranges can be specified. The entry is invalid if the target
number is omitted.
❒ Sessions other than those from a Web Image Monitor or telnet are limited
by access control.
82