Ricoh Priport HQ9000 Network Manual page 87

❖ Configuration
msh> ifconfig interface_name parameter address
Interface name
ether
*2
wlan
*1
If you did not enter an interface name, it will automatically be set to the Ethernet
interface.
*2
You can specify an interface when installing the IEEE 802.11b interface unit.
Parameter
(no parameter)
netmask
broadcast
❖ Changing the Interface
You can specify either Ethernet interface or IEEE 802.11b interface when us-
ing the IEEE 802.11b interface unit.
msh> ifconfig interface up
The following is a sample configuration, using an IP address of 192.168.15.16 on
an Ethernet interface:
msh> ifconfig ether 192.168.15.16
The following is a sample configuration, using a subnet mask of 255.255.255.0 on
an Ethernet interface:
msh> ifconfig ether netmask 255.255.255.0
Note
❒ This affects the configuration of the network interface module on the IP ad-
dress used.
❒ The TCP/IP setting is the same as that of the Ethernet interface and IEEE
802.11b interface.
❒ To enter an address using hexadecimal, prefix it with "0x".
Interface to be configured
*1
Ethernet interface
IEEE 802.11b interface
Meaning
IP address
subnet mask
broadcast address
Remote Maintenance by telnet
9
81