Table of Contents
Advertisement
Moving or Shipping Your System
Use these steps to prepare your system for moving or
shipping:
Back up your hard disk files onto diskettes, Zip disks,
1.
Jaz cartridges, or tape cartridges.
Be sure to take precautions for storing and transporting
diskettes, disks, or cartridges so that they are not
exposed to magnetic fields or electrical impulses.
2.
Remove any diskette from the diskette drive. If you have
a CD in the CD-ROM reader, remove the CD. Remove
any Zip disk, Jaz cartridge, or tape cartridge from the
system.
Turn off the system unit and any external options
3.
connected to it.
Unplug the system unit power cable from the wall outlet
4.
or surge suppressor, then from the unit itself.
Unplug any external options from the wall outlets or
5.
surge suppressor, then disconnect them from the system
unit.
Rotate the feet so they are under the system unit.
6.
Pack the system components in the original shipping
7.
materials and cartons. If these are not available, be sure
to use adequate packing materials to protect the
components.
To set up your system, follow the steps on the PowerMate
Professional 9000 Series Quick Setup poster that comes
with your computer.
2-24 Using Your Computer
Advertisement
Table of Contents
