Table of Contents
Advertisement
Gently put the ball back into the mouse.
6.
Fit the ball cover back into the mouse and turn the cover
7.
clockwise until it locks in place.
Moving or Shipping Your System
Use these steps to prepare your system for moving or
shipping:
Back up your hard disk files onto diskettes, Zip disks,
1.
or tape cartridges.
Be sure to take precautions for storing and transporting
diskettes or cartridges so that they are not exposed to
magnetic fields or electrical impulses.
2.
Remove any diskette from the diskette drive. If you have
a CD in the CD-ROM reader, remove the CD.
Turn off the system unit and any external options
3.
connected to it.
Unplug the system unit power cable from the wall outlet
4.
or surge suppressor, then from the unit itself.
Unplug any external options from the wall outlets or
5.
surge suppressor, then disconnect them from the system
unit.
For minitower models, remove the stand.
6.
Pack the system components in the original shipping
7.
materials and cartons. If these are not available, be sure
to use adequate packing materials to protect the
components.
To set up your system, follow the steps on the PowerMate
Enterprise Quick Setup poster that comes with your
computer.
Using Your Computer 2-25
Advertisement
Table of Contents
