Table of Contents
Advertisement
T
Multiple Sector Transfers
Enter the number of sectors transferred per block.
Choices include "Disabled" (no sectors chosen),
"Standard" (one sector), 2, 4, 8, and 16 sectors.
T
LBA Mode Control
When "Enabled" is selected, it causes logical block
addressing to be used in place of cylinders, heads, and
sectors.
T
Transfer Mode
Enter the method for transferring the data between the
hard disk drive and the system memory. The Setup menu
only lists those options supported by the drive. Choices
can include
T
Ultra DMA Mode
This field sets the Ultra DMA mode, which allows a
faster read/write file transfer rate (33 MB per second).
Choices include Mode 0, Mode 1, and Mode 2, and
Disabled (the default). This setting should be disabled if
an older hard disk drive is installed that is not supported
by Ultra DMA mode.
4-10 Using Tools and Utilities
Standard
Fast PIO 1, Fast PIO 2, Fast PIO 3, or Fast PIO 4
FPIO3 and Bus Mastering
FPIO4 and Bus Mastering.
Advertisement
Table of Contents
