Table of Contents
Advertisement
Follow these steps to rebuild your hard disk and restore
your original, factory-installed operating system using OS
Restore:
Power on or restart the system and immediately insert
1.
the Select Install disc into the CD-ROM reader.
NOTE
bootable diskette is included with the NEC Select
Install CD. In SCSI systems, first boot the system
from the bootable diskette. After the system boots,
proceed with the NEC Select Install procedure
described below.
After the system boots from the CD, the Operating
System Restore Welcome screen appears (see the
following figure).
4-56 Using Tools and Utilities
For systems with a SCSI hard disk, a
Welcome screen
Advertisement
Table of Contents
