Table of Contents
Advertisement
T
On LAN
This field enables your system to be contacted via a
LAN even when your system is in a power reduction
state. Choose "Power On" (the default) to restore the
system to full power so the LAN connection can be
made. Choose "Stay Off" if you do not want full power
restored. (Wake on LAN does not work if the Restore
On AC/Power Loss field is set to "Stay Off.")
T
On PME
This field controls how the system responds to a PCI
Power Management Enable (PME) wake up event. The
choices are "Power On" (the default), and "Stay Off."
T
Quick Boot Mode
When Quick Boot Mode is set to "Enabled" (the
default), the system boots without running some POST
tests.
T
Boot Order
These fields allow you to set the order in which your
system's drives boot up. The default order is:
First Boot Device: Removable Devices
Second Boot Device: ATAPI CD-ROM Drive
Third Boot Device: Hard Disk
Fourth Boot Device: Network Boot
Fifth Boot Device; LANDesk Server (this field
only appears when an Intel Pro 100 LAN board is
installed in the system).
T
Hard Drive
This field lists the bootable hard disk drives in your
system as well as bootable ISA boards.
Using Tools and Utilities 4-25
Advertisement
Table of Contents
