Remove the battery and discard in accordance with the
6.
manufacturer's instructions.
Carefully lift the clip on the battery socket.
7.
With the positive (+) side facing up, slide the new
8.
battery into the socket.
9.
Slide the system board back into the chassis (see
"Replacing the System Board" in Chapter 5).
10.
Replace the system unit cover (see "Replacing the
System Unit Cover" in Chapter 5).
Connect external peripherals and power cables.
11.
Run the Setup Utility to reconfigure your system
12.
parameters (see "The Setup Utility" in Chapter 4).
Removing the battery
Solving System Problems 8-11