Table of Contents
Advertisement
T
Dissipate static electricity before handling any system
components (boards, chips, and so on) by touching a
grounded metal object, such as the system's unpainted
metal chassis.
If possible, use anti-static devices, such as wrist straps
and floor mats.
T
Always hold a chip or board by its edges. Avoid
touching the components on the chip or board.
T
Take care when connecting or disconnecting cables. A
damaged cable can cause a short in the electrical circuit.
T
When installing a cable, route the cable so it is not
pinched by other components and it is out of the path of
the system unit cover.
T
Prevent damage to the connectors by aligning connector
pins before you connect the cable.
Misaligned connector pins can cause damage to system
components at power-on.
T
When disconnecting a cable, always pull on the cable
connector or strain-relief loop, not on the cable itself.
Installing Options 5-3
Advertisement
Table of Contents
