Table of Contents
Advertisement
Slide the cover forward to meet the front panel.
3.
NOTE
slide all the way to the front panel, make sure that
the tabs along the top, back, and bottom of the
cover are aligned with the notches and rails in the
chassis.
4.
Secure the cover with the three screws (see "Removing
the Covers").
5.
If you have a chassis lock that connects to the
Kensington Security Standard connector, reconnect it
to the chassis.
Reconnect all external peripherals.
6.
Plug in the system power cables.
7.
Repeat this procedure if the other cover must be replaced
NOTE
Manager logs the intrusion and reports it in a screen
message the next time the system is booted. This
message appears every time the system is rebooted
until the report is cleared. For more information on
closing the notification window and clearing the
message,
Notification Feature" in Chapter 4.
5-8 Installing Options
The cover fits tightly. If the cover does not
If the cover is removed, LANDesk Client
see
"Using
the
Chassis
Intrusion
Advertisement
Table of Contents
