Displaying Qcl Status; Figure 92: Queueing Counters - SMC Networks SMCGS10P-SMART Management Manual

| Monitoring the Switch
C 5
HAPTER
Displaying Information About Ports
D QCL
ISPLAYING
S
TATUS
P
ARAMETERS
These parameters are displayed:
Port – Port identifier.
◆
Q# Receive/Transmit – The number of packets received and
◆
transmitted through the indicated queue.
W I
EB NTERFACE
To display the queue counters, click Monitor, Ports, QoS Statistics.

Figure 92: Queueing Counters

Use the QoS Control List Status page to show the QCE entries configured
for different users or software modules, and whether or not there is a
conflict.
P
ATH
Monitor, Ports, QCL Status
P
ARAMETERS
These parameters are displayed:
◆ User – Indicates the user (static entry, software module, or conflicting
entry) of this QCE. The information displayed in this field depends on
the option selected in the drop-down list at the top of this page
(Combined, Static, Voice VLAN, Conflict).
QCE# – QoS Control Entry index.
◆
Frame Type – Indicates the type of frame to look for in incoming
◆
frames. Possible frame types are: Any, Ethernet, LLC, SNAP, IPv4, IPv6.
Port - Port identifier.
◆
Action – Indicates the classification action taken on ingress frame if
◆
the configured parameters are matched in the frame's content. If a
frame matches the QCE, the following actions will be taken:
– 206 –