Figure 23: Snmpv3 Group Configuration - SMC Networks SMCGS10P-SMART Management Manual

Select the security name. For SNMP v1 and v2c, the security names
4.
displayed are based on the those configured in the SNMPv3
Communities menu. For USM, the security names displayed are based
on the those configured in the SNMPv3 Users Configuration menu.
Enter a group name. Note that the views assigned to a group must be
5.
specified on the SNMP Accesses Configuration menu (see
Click Save.
6.

Figure 23: SNMPv3 Group Configuration

C SNMP 3 V
ONFIGURING V
Use the SNMPv3 View Configuration page to define views which restrict
user access to specified portions of the MIB tree. The predefined view
"default_view" includes access to the entire MIB tree.
CLI R
EFERENCES
"SNMP Commands" on page 330
P
ARAMETERS
These parameters are displayed:
View Name - The name of the SNMP view. (Range: 1-32 characters,
◆
ASCII characters 33-126 only)
View Type - Indicates if the object identifier of a branch within the MIB
◆
tree is included or excluded from the SNMP view. Generally, if the view
type of an entry is "excluded," another entry of view type "included"
should exist and its OID subtree should overlap the "excluded" view
entry.
OID Subtree - Object identifiers of branches within the MIB tree. Note
◆
that the first character must be a period (.). Wild cards can be used to
mask a specific portion of the OID string using an asterisk.
(Length: 1-128)
– 73 –
C
HAPTER
IEWS
| Configuring the Switch
4
Configuring Security
page 74).