C
T
ONFIGURING
HERMAL
Figure 9: Configuring EEE Power Reduction
P
ROTECTION
Use the Thermal Protection Configuration page to set temperature priority
levels, and assign those priorities for port shut-down if exceeded.
P
ATH
Configuration, Thermal Protection
C
U
OMMAND
SAGE
Thermal protection is used to protect the switch ASIC from overheating.
When the internal temperature of the switch exceeds a specified protection
level, ports can be turned off to decrease power consumption. Port shut
down can be prioritized based on assigned temperatures.
P
ARAMETERS
These parameters are displayed:
Temperature settings for priority groups
Priority – A priority assigned to a specific temperature. (Range: 0-3)
◆
Temperature – The temperature at which the ports with the
◆
corresponding priority will be turned off. (Range: 0-255° C)
Port priorities
Port – Port identifier.
◆
◆
Priority – The priority level at which to shut down a port. (Range: 0-3)
– 51 –
| Configuring the Switch
C
4
HAPTER
Configuring Thermal Protection