Displaying The Current Sta For Ports - SMC Networks 6724L2 - annexe 1 Management Manual

C I
ONSOLE NTERFACE
Parameter
Hold Time
Designated Root
Root Cost
Root Port
Configuration Changes The number of times the Spanning Tree has been
Topology Up Time

Displaying the Current STA for Ports

The parameters shown in the following figure and table are for
port STA Information.
Port
------------------------------------------------------------------
1
2
3
4
5
6
7
8
9
10
11
12
2-64
Description
The minimum interval between the transmission
of consecutive Configuration BPDUs.
The priority and MAC address of the device in the
Spanning Tree that this switch has accepted as the
root device.
The path cost from the root port on this switch to
the root device.
The number of the port on this switch that is
closest to the root. This switch communicates
with the root device through this port. If there is
no root port, then this switch has been accepted
as the root device of the Spanning Tree network.
reconfigured.
The time since the Spanning Tree was last
reconfigured.
Bridge Menu: Spanning Tree Port Information (Port 1-12)
===========
Type Status
100TX FORWARDING
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
100TX DISABLED
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Designated Designated
Cost Bridge
38 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
0 32768.00E0296E3EC0
<Prev Page>
Designated
Port
128.1
128.2
128.3
128.4
128.5
128.6
128.7
128.8
128.9
128.10
128.11
128.12
<Next Page>