Displaying The Current Sta For Ports - SMC Networks 8606SX - annexe 1 Management Manual

U S
SIN G T HE YST EM
Parameter
Design ated Root
Root Cost
Root Por t
Reconfig Count
Topology Up Time

Displaying the Current STA for Ports

The parameters shown in the following figure and table are for
port STA Information.
Port Type
---- ------ ----- ----- ----- ----- ----- ------ ----- ----- ----- ---
1. 1000S X
2. 1000S X
3. 1000S X
4. 1000S X
5. 1000S X
6. 1000S X
7. 1000S X
8. 1000S X
Use <T AB> o r arr ows k eys t o mov e. <En ter> to se lect.
2-34
C
ONFIGURATION
Description
The pr iority and MAC address of the device in the
Spanning Tr ee that this switch has accepted as the
root device.
The path cost from the root port on this switch to
the root device.
The number of the port on this switch that is
closest to the r oot. This switch communicates with
the root device through this port. If there is no
root port, then this switch has been accepted as
the root device of the Spanning Tree network.
The number of times the Spanning Tree has been
reconfigured.
The time since the Spanning Tree was last
reconfigured.
Ti gerSw itch 1000 SMC860 8SX
Sp annin g Tre e Inf ormati on
S tatus Des ignat ed
FO RWARD ING
FO RWARD ING
FO RWARD ING
FO RWARD ING
LI STENI NG
LE ARNIN G
FO RWARD ING
FO RWARD ING
P
ROGRAM
Desig nated
Co st B ridge
0 128 .0000E 800E8 00
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
4 327 68.00E 02952 2800
<OK >
D esign ated
Port
128. 3
128. 1
128. 1
128. 5
128. 6
128. 3
128. 3
128. 3