SMC Networks 6724L2 - annexe 1 Management Manual page 43

Parameter Default Description
Link Status
Admin Enabled Allows you to disable a port due to abnormal
Status
Auto Enabled Enables or disables auto-negotiation for the
Negotiate
Default Type 10HDX If auto-negotiation is disabled, the port will
Current Type
Indicates if the port has a valid connection to
an external device.
behavior (e.g., excessive collisions), and
then reenable it after the problem has been
resolved. You may also disable a port for
security reasons.
following features
Port Type Speed
10/100BASE-T auto
100BASE-FX 100M
1000BASE-SX 1000M full duplex auto
1000BASE-LX 1000M full duplex auto
1000BASE-T 1000M full duplex auto
The 10/100BASE-TX ports can
auto-negotiate the speed to 10/100 Mbps,
and the transmission mode to half/full duplex.
The plug-in modules are all fixed at the
indicated speed and duplex mode. All media
types can auto-negotiate flow control.
be set to the indicated speed and duplex
mode.
Indicates the current speed and duplex
mode.
D C
EVICE ONTROL
Duplex Flow
Mode Control
auto auto
full duplex auto
M
ENU
2-29