C
I
ONSOLE
NTERFACE
For the extender modules (ports 25, 26), the possible port trunking
combinations are set out belo
Extender Module
100BASE-FX
1000BASE-SX,
1000BASE-LX,
1000BASE-T
To add a trunk, select <Add>. To delete a trunk, highlight the
required entry and select Enter. Before disconnecting a port trunk,
take the following steps:
•
Before removing a port trunk via the configuration menu, you
must disable all the ports in the trunk or remove all the network
cables. Otherwise, a loop may be created.
•
To disable a single link within a port trunk, you should first
remove the network cable, and then disable both ends of the
link via the configuration menu. This allows the traffic passing
across that link to be automatically distributed to the other links
in the trunk, without losing any significant amount of traffic.
2-34
w.
Can be trunked together.
Can be trunked together, irrespective of media.