Parameter
IP State
VLAN ID
Mgt. Access
Description
Specifies whether IP functionality is enabled via
manual configuration, or set by Boot Protocol
(BOOTP). Options include:
USER-CONFIG - IP functionality is enabled based on
BOOTP Get IP - IP is enabled but will not function
The VLAN used for management access when "Mgmt
VLAN" is selected. (See the next item.)
Allows management access of the switch from all
VLANs or only from a specified VLAN. If you select
"Mgmt VLAN," then select Apply to display the VLAN
ID field, select the required VLAN, and then select
Apply or OK to save your changes.
M
ANAGEMENT
the default or user specified IP
Configuration. (This is the default
setting.)
until a BOOTP reply has been
received. BOOTP requests will be
broadcast periodically by the switch
in an effort to learn its IP address.
(BOOTP values can include the IP
address, default gateway, and subnet
mask.)
S
M
ETUP
ENU
2-13