To add a trunk, highlight a port group in the New Setting list and
press Add. To delete a trunk, highlight a port group in the Trunk
List and press Delete. Before disconnecting a port trunk, take the
following steps:
•
Before removing a port trunk via the configuration menu, you
must disable all the ports in the trunk or remove all the network
cables. Otherwise, a loop may be created.
•
To disable a single link within a port trunk, you should first
remove the network cable, and then disable both ends of the
link via the configuration menu. This allows the traffic passing
across that link to be automatically distributed to the other links
in the trunk, without losing any significant amount of traffic.
D
C
EVICE
ONTROL
M
ENU
3-27