SMC Networks 6724L2 - annexe 1 Management Manual page 58

C I
ONSOLE NTERFACE
Parameter
1
GARP
Join Time
Leave Time 60
Leave All
Time
1. The default values for the GARP timers are independent of the media
access method or data rate. These values should not be changed unless
you are experiencing difficulties with GMRP or GVRP registration/
deregistration.
2-44
Default Description
Group Address Registration Protocol is used by
GVRP and GMRP to register or deregister client
attributes for client services within a bridged LAN.
20 The interval (centiseconds) between
transmitting requests/queries to participate in a
group.
The interval (centiseconds) a port waits before
leaving a group.
This time should be set to more than twice the
Join Time. This ensures that after a Leave or
LeaveAll message has been issued, the
applicants can re-join before the port actually
leaves the group.
1000 The interval (centiseconds) between sending
out a LeaveAll query message for group
participants and the port leaving the group.
This interval should be considerably larger than
the Leave Time to minimize the amount of
traffic generated by nodes rejoining the group.