Table of Contents
Advertisement
C
I
ONSOLE
NTERFACE
Parameter
GVRP
Priority
Threshold*
(Address)
Aging Time
* You can use "VLAN Port Configuration" on page 2-43 to configure the
default priority for each port.
2-40
Default Description
Disabled GARP VLAN Registration Protocol (GVRP)
defines a way for switches to exchange VLAN
information in order to register VLAN members
on ports across the network. This function
should be enabled to permit automatic VLAN
registration, and to support VLANs which extend
beyond the local switch.
If GVRP is globally enabled for the switch, then
you can individually enable or disable GVRP for
a specific port. See "VLAN Port Configuration"
on page 2-43.
4
This switch supports Quality of Service (QoS) by
using two priority queues, with Weighted Fair
Queuing for each port. Up to 8 separate traffic
classes are defined in IEEE 802.1p. Therefore,
any packets with a priority equal to or higher
than this threshold are placed in the high
priority queue.
300
Timeout period in seconds for aging out
dynamically learned forwarding information.
Range: 10 - 415 seconds
Advertisement
Table of Contents
