Displaying The Current Global Settings For Sta - SMC Networks SMC6750L2 Management Manual

• Forward Delay – The maximum time (in seconds) the root device
will wait before changing states (i.e., listening to learning to
forwarding). This delay is required because every device must receive
information about topology changes before it starts to forward frames.
In addition, each port needs time to listen for conflicting information
that would make it return to a blocking state; otherwise, temporary data
loops might result.
- Default: 15
- Minimum: The higher of 4 or [(Max. Message Age / 2) + 1]
- Maximum: 30

Displaying the current global settings for STA

Web – Click STA/STA Information.
S T
PANNING REE
P C
ROTOCOL ONFIGURATION
2-35