Removing The Hybrid Cooling Fan - Dell LATITUDE Latitude C600 Service Manual

46 Re m o vi n g a n d Re p l a c i n g Par ts

Removing the Hybrid Cooling Fan

Remove the hard drive.
1
Remove the keyboard assembly.
2
Remove the display assembly.
3
Remove the palmrest assembly.
4
Remove the thermal cooling assembly.
5
Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that
6
secure the hybrid cooling fan to the system board.
Disconnect the fan power cable from the system board interface
7
connector and remove the hybrid cooling fan.
NOTE: The fan power cable is long, and can be pulled out from under the
EMI shield to provide access to the connector.
NOTICE: Do not block the keyboard screw hole when reinserting the fan
cable.