Screw Identification - Dell LATITUDE Latitude C600 Service Manual

12 Be fo r e Yo u Be gin

Screw Identification

When you are removing and replacing components, photocopy the
placemat as a tool to lay out and keep track of the component screws. The
placemat provides the number of screws and the sizes.
S c r e w I d e n t i f i c a t i o n
NOTICE: When reinstalling a screw, you must use a screw of the correct
diameter and length. Make sure that the screw is properly aligned with its
corresponding hole, and avoid overtightening.
S c r e w P l a c e m e n t
Hard Drive
Door Security:
(1 each)
Keyboard to Bottom
Case Assembly:
(5 each)