Cooling Fans; Removing A Cooling Fan - Dell EMC PowerEdge T550 Installation And Service Manual

Steps
1. Align the tabs on the air shroud with the guide pins on the system.
2. Lower the air shroud into the system, until firmly seated.
Figure 34. Installing the air shroud
Next steps
Follow the procedure listed in

Cooling fans

Removing a cooling fan

The procedure for removing a standard and a high-performance fan is identical.
Prerequisites
NOTE: Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
CAUTION: The cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only
one fan at a time.
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
Steps
Press the release tab and lift the cooling fan out of the cooling fan cage.
46 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
system.
system.