Hybrid Cooling Fan - Dell LATITUDE Latitude C600 Service Manual

Turn the computer over, lift the keyboard up, rotate it forward toward
3
the front of the computer, and place it face down on the palmrest.
Loosen the four captive screws securing the microprocessor thermal
4
cooling assembly.
Remove the microprocessor thermal cooling assembly from the system
5
board assembly.
NOTICE: When reattaching the microprocessor thermal cooling assembly,
tighten the captive screws in consecutive order, from 1 to 4.

Hybrid Cooling Fan

H y b r i d C o o l i n g Fa n
M2.5 x 5-mm screws (2)
M2 x 3-mm screw (1)
hybrid cooling fan
Re m o v i n g a nd Rep l a ci n g Part s
45