Removing The Hybrid Cooling Fan - Dell Latitude C610 Service Manual

Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Hybrid Cooling Fan
Dell™ Latitude™ C610/C510 Service Manual

Removing the Hybrid Cooling Fan

Removing the Hybrid Cooling Fan
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Remove the keyboard.
3. Remove the
4. Remove the
5. Remove the
6. Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure
the hybrid cooling fan to the system board.
Hybrid Cooling Fan Removal
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/fan.htm (1 of 3) [2/28/2004 7:55:52 AM]
"Preparing to Work Inside the
hard drive.
display assembly.
palm rest.
microprocessor thermal cooling
Computer" before performing the
assembly.