Replacing The Display-Assembly Top Cover; Replacing The 12.1-Inch Display Panel - Dell LATITUDE Latitude C600 Service Manual

Lift up the right side of the display panel, and pull the panel out of the
7
display-assembly top cover at an angle.

Replacing the Display-Assembly Top Cover

If you are replacing the display-assembly top cover, remove the support
bracket.
Remove the two M2 x 4-mm screws on the left side of the
1
display-assembly top cover and the two M2 x 4-mm screws on the right
side of the display-assembly top cover.
Lift the support bracket out of the display-assembly top cover.
2

Replacing the 12.1-Inch Display Panel

Place the left edge of the display panel against the left side of the
1
support bracket in the display-assembly top cover, and elevate the right
side of the panel with your hand.
Lay the display panel into the display-assembly top cover.
2
Reinstall the four M3 x 3-mm screws that secure the display panel to
3
the support bracket.
Re m o v i n g a nd Rep l a ci n g Part s
35