Microprocessor Module; Removing The Microprocessor Module - Dell LATITUDE Latitude C600 Service Manual

Microprocessor Module

M i c r o p r o c e s s o r M o d u l e s
NOTICE: Hold the microprocessor down while turning the cam screw to
prevent intermittent contact between the cam screw and microprocessor.
perpendicular
screwdriver
ZIF socket
cam screw
type I ZIF socket

Removing the Microprocessor Module

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Remove the hard drive.
1
Remove the keyboard assembly.
2
NOTICE: To ensure maximum cooling for the microprocessor, do not touch
the heat transfer areas on the thermal cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.
pin-1 corner
ZIF socket
processor die
cam screw
(do not touch)
type II ZIF socket
perpendicular
screwdriver
Re m o v i n g a nd Rep l a ci n g Part s
pin-1 corner
processor die
(do not touch)
47