Display Assembly Latch; Removing The Display Assembly Latch - Dell LATITUDE Latitude C600 Service Manual

Disconnect the bottom flex cable connector from the inverter
6
connector by pulling straight up on the attached pull tab.
Remove the tape that covers the display panel connector.
7
Pull the top flex cable connector down and away to remove it from the
8
display panel connector.

Display Assembly Latch

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
D i s p l a y A s s e m b l y L a t c h f o r 1 4 . 1 - I n c h X G A D i s p l a y P a n e l s

Removing the Display Assembly Latch

Remove the hard drive.
1
Remove the display assembly.
2
Remove the display assembly bezel.
3
display assembly latch
M2.5 x 5-mm
screws (2)
Re m o v i n g a nd Rep l a ci n g Part s
37