32
Re m o vi n g a n d Re p l a c i n g Par ts
Removing the Display-Feed Flex Cable (14.1-Inch Display Panel)
D i s p l a y - Fe e d F l e x C a b l e
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Remove the hard drive.
1
Remove the display assembly.
2
Remove the display assembly bezel.
3
Remove the tape that covers the display panel connector.
4
Pull the top flex cable connector down and away to remove it from the
5
display panel connector.
display panel connector
top flex cable connector
pull tab
bottom flex
cable connector
inverter
connector