44
Re m o vi n g a n d Re p l a c i n g Par ts
Microprocessor Thermal Cooling
Assembly
M i c r o p r o c e s s o r T h e r m a l C o o l i n g A s s e m b l y
Removing the Microprocessor Thermal Cooling Assembly
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Remove the hard drive.
1
Remove the keyboard screws.
2
microprocessor thermal cooling assembly
captive screws (4)