Dell POWEREDGE 4300 Service Manual page 91

Dell computer motherboard user manual

Hide thumbs Also See for POWEREDGE 4300:

Table of Contents

retaining clip

terminator

card

guide bracket

assembly

To remove a terminator card, follow these steps:

1. Remove the retaining clip from the guide bracket assembly.

Using the thumb and forefinger of each hand, pinch the tabs at each end of

the clip (see Figure 4-29), and then lift the clip straight up.

2. Remove the terminator card.

Hold the card by its edges, and lift the card straight up from the guide

bracket assembly.

tabs (2)

notch

Removing and Replacing Parts

4-33

Table of Contents