Dell POWEREDGE 4300 Service Manual page 67

Dell computer motherboard user manual

Hide thumbs Also See for POWEREDGE 4300:

Table of Contents

drive release tabs (2)

To remove a 3.5-inch or 5.25-inch drive assembly from one of the externally

accessible drive bays, follow these steps:

1. Press the two drive release tabs toward the center of the drive, and slide

the drive out the front of the bay (see Figure 4-6).

2. Disconnect the DC power cable and the interface cable from the back of

the drive.

Be sure to record the power connector number and the location of the

interface cable connector.

Removing and Replacing Parts

4-9

Table of Contents