Dell POWEREDGE 4300 Service Manual page 46

3-6 Dell PowerEdge 4300 Systems Service Manual
Faulty diskette,
diskette drive, or
hard-disk drive
Faulty or improperly
seated DIMM
Faulty or improperly
inserted diskette,
incorrect configura-
tion settings in
System Setup
program, loose
diskette/tape drive
interface cable, or
loose power cable
Faulty diskette,
faulty or improperly
connected diskette/
tape drive interface
cable, or loose
power cable
Faulty diskette/tape
drive controller
(defective system
board)
Diskette write-
protect feature
activated
Diskette missing
from or improperly
inserted in diskette
drive
Defective system
board
DGGUHVV
Faulty or improperly
seated DIMM or
defective system
DGGUHVV
board
Replace the diskette, dis-
kette drive, or hard-disk
drive.
Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs.
Replace the diskette.
Run the System Setup
program to correct the
diskette drive type.
Check the diskette/tape
drive interface cable and
power cable connec-
tions to the drive.
Check the diskette/tape
drive interface cable and
power cable connec-
tions to the drive.
Replace the diskette
drive interface cable.
Replace the system
board.
Move the write-protect
tab on the diskette.
Reinsert or replace the
diskette.
Replace the system
board.
Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs. If the problem
still persists, replace the
system board.