Faulty or improperly
seated DIMM or
defective system
DGGUHVV
board
YDOXH
YDOXH
DGGUHVV
YDOXH
YDOXH
DGGUHVV
YDOXH
YDOXH
DGGUHVV
YDOXH
YDOXH
Faulty application
program
Faulty or improperly
seated DIMM
DGGUHVV
POST memory test
terminated by
pressing the
spacebar
Faulty diskette,
diskette/tape drive
subsystem,
hard-disk drive, or
hard-disk drive sub-
system, or no boot
diskette in drive A
Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs. If the problem
still persists, replace the
system board.
Restart the application
program.
Remove and reseat the
DIMMs. If the problem
persists, replace the
DIMMs.
No action is required.
Replace the diskette or
hard-disk drive. If the
problem persists,
replace the system
board.
Codes and Messages
3-9