Assembling The Pins For The Rear Support Stand; Placing The Vehicle On The Rear Support Stand - APRILIA RSV 1000 R FACTORY Manual

1
2
ASSEMBLING THE PINS FOR THE
REAR SUPPORT STAND
Place the vehicle on the stand, see
u
page 77 (PLACING THE VEHICLE ON
THE STAND).
u H Place the pin (1) on the appropriate
seat on the swinging arm.
u H Insert and tighten the screw (2) in the
appropriate threaded hole (3) in the
swinging arm.
1
3
5
PLACING THE VEHICLE ON THE
REAR SUPPORT STAND
Assemble the pins for the rear support
u
stand , see above (ASSEMBLING
THE PINS FOR THE REAR SUPPORT
STAND
NOTE
Have someone help you keep the
vehicle vertical with the two wheels on the
ground.
1
5
).
use and maintenance RSV 1000 R
6
7
u H Slacken the knob (7).
u H Shift the fork-shaped support (6) so
that its width matches the distance
between the two pins (1) fitted to the
swinging arm.
u H Tighten the knob (7).
u Slide both fork-shaped seats (6) of the
stand (8) underneath the pins (1) fitted to
the vehicle simultaneously.
u Place one foot on the rear end of the
stand (8).
u Push down on the stand (8).
CAUTION
Make sure the vehicle is stable.
- RSV 1000 RFACT
USA
1
8
101
USA