Restore Configuration; Figure 64 Configuration Upload Successful; Figure 65 Network Temporarily Disconnected; Table 42 Restore Configuration - ZyXEL Communications ZYAIR G-5100 User Manual

11.6.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved configuration file from
your computer to your ZyAIR.

Table 42 Restore Configuration

LABEL
File Path
Browse...
Upload
After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyAIR again.

Figure 64 Configuration Upload Successful

The ZyAIR automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 65 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyAIR IP address (192.168.1.2). See
Appendix D on page 206
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Chapter 11 Maintenance
Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Note: Do not turn off the ZyAIR while configuration file upload is
in progress.
for details on how to set up your computer's IP address.
ZyAIR G-5100 User's Guide
DESCRIPTION
134