Figure 43 AUTH. SERVER: Trusted AP
The following table describes the labels in this screen.
Table 26 AUTH. SERVER: Trusted AP
LABEL
Active
IP Address
Shared Secret
8.4 Configuring Trusted Users
To specify which users can communicate with the ZyAIR, click AUTH. SERVER and then
Trusted Users. The screen appears as shown.
Chapter 8 Authentication Server
DESCRIPTION
Activate an entry to allow that AP to communicate with the ZyAIR.
Deactivate an entry to block that AP from communicating with the ZyAIR.
Enter the IP address of the AP in dotted decimal notation.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the AP and the ZyAIR.
The key is not sent over the network. This key must be the same on the AP
and the ZyAIR.
ZyAIR G-5100 User's Guide
100