Authentication Required: 802.1X; Figure 37 Wireless Lan: 802.1X/Wpa; Table 19 Wireless Lan: 802.1X/Wpa - ZyXEL Communications ZYAIR G-5100 User Manual

ZyAIR G-5100 User's Guide

Figure 37 Wireless LAN: 802.1x/WPA

The following table describes the labels in this screen.

Table 19 Wireless LAN: 802.1x/WPA

LABEL
Wireless Port
Control
Apply
Reset

6.16 Authentication Required: 802.1x

Select Authentication Required in the Wireless Port Control field and 802.1x in the Key
Management Protocol field to display the next screen.
85
DESCRIPTION
To control wireless stations access to the wired network, select a control method
from the drop-down list box. Choose from No Access Allowed, No
Authentication Required and Authentication Required.
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired
network without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter
usernames and passwords before access to the wired network is allowed.
Select Authentication Required to configure Key Management Protocol and
other related fields.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless Security