Figure 60 Firmware Upload In Process
The ZyAIR automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 61 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Figure 62 Firmware Upload Error
11.6 Configuration Screen
See
Chapter 19 on page 176
Chapter 11 Maintenance
for transferring configuration files using FTP/TFTP commands.
ZyAIR G-5100 User's Guide
132