Introducing The Web Configurator; Accessing The Zyair Web Configurator; Figure 7 Change Password Screen - ZyXEL Communications ZYAIR G-5100 User Manual

This chapter describes how to access the ZyAIR web configurator and provides an overview
of its screens. The default IP address of the ZyAIR is 192.168.1.2.

2.1 Accessing the ZyAIR Web Configurator

1 Make sure your ZyAIR hardware is properly connected (refer to the Quick Installation
Guide).
2 Prepare your computer/computer network to connect to the ZyAIR (refer to the
appendix).
3 Launch your web browser.
4 Type "192.168.1.2" (default) as the URL.
5 Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
6 You should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore to allow access without password change.

Figure 7 Change Password Screen

7 Click Apply in the Replace Certificate screen to create a certificate using your ZyAIR's
MAC address that will be specific to this device.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
ZyAIR G-5100 User's Guide
H A P T E R
Configurator
2
34