Figure 12-8 Bandwidth Manager: Class Setup; Table 12-3 Bandwidth Manager: Class Setup - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
The following table describes the labels in this screen.
LABEL
Interface
Back
Add Child-Class
Edit
Delete
Statistics
12.9.1 Bandwidth Manager Class Configuration
Configure a bandwidth management class in the Class Configuration screen. You must use the Bandwidth
Manager - Summary screen to enable bandwidth management on an interface before you can configure
classes for that interface.
To add a child class, click BW Manager, then Class Setup. Click the Add Child-Class button to open the
following screen.
12-12

Figure 12-8 Bandwidth Manager: Class Setup

Table 12-3 Bandwidth Manager: Class Setup

Select an interface from the drop-down list box for which you wish to set up classes.
Click Back to go to the main BW Manager screen.
Click Add Child-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its child-classes. You cannot delete the root
class.
Click Statistics to display the status of the selected class.
DESCRIPTION
Bandwidth Management