Configuring A Filter Set For The Prestige 650H And The Prestige 650Hw; Figure 23-3 Menu 21 Filter Set Configuration (P650H/Hw) - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
For incoming packets, your Prestige applies data filters only. Packets are processed depending on whether a
match is found. The following sections describe how to configure filter sets.
The Filter Structure of the Prestige
A filter set consists of one or more filter rules. Usually, you would group related rules, for example, all the
rules for NetBIOS, into a single set and give it a descriptive name. You can configure up to twelve filter
sets with six rules in each set, for a total of 72 filter rules in the system.
23.2 Configuring a Filter Set for the Prestige 650H and the
Prestige 650HW
To configure a filter set, follow the steps shown next.
Step 1. Enter 21 in the main menu to display Menu 21 – Filter Set Configuration.
Filter
Set #
------
1
2
3
4
5
6

Figure 23-3 Menu 21 Filter Set Configuration (P650H/HW)

Step 2. Type the filter set to configure (no. 1 to 12) and press [ENTER]
Step 3. Type a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 4. Press [ENTER] at the message
Rules Summary (that is, if you selected filter set 2 in menu 21).
23-4
Menu 21 - Filter Set Configuration
Comments
-----------------
_______________
NetBIOS_WAN
NetBIOS_LAN
IGMP
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Press ENTER to confirm..." to display Menu 21.2 – Filter
"
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 WebSet1
12 WebSet2
.
Filter Configuration