Table 10-1 Remote Management - ZyXEL Communications PRESTIGE 650H User Manual

The following table describes the labels in this screen.
LABEL
Server Type Each of these labels denotes a service that you may use to remotely manage the Prestige.
Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
Access
Status
Port This field shows the port number for the remote management service. You may change the port
number for a service in this field, but you must use the same port number to use that service for
remote management.
Secured The default 0.0.0.0 allows any client to use this service to remotely manage the Prestige. Type
Client IP an IP address to restrict access to a client with a matching IP address.
Apply Click Apply to save your settings back to the Prestige.
Cancel Click Cancel to begin configuring this screen afresh.
Remote Management Configuration
Figure 10-2 Remote Management

Table 10-1 Remote Management

DESCRIPTION
Prestige 650 Series User's Guide
10-3